• Step 1
    Setting mold and metal surface in place,then put the disk into mold.
  • Step 2
    Gently tap all welding powder into the mold and trace the starting powder onto the mold.
  • Step 3
    Ignite the starting powder with flint gun.
  • Step 4
    The exothermic reaction is on.
  • Step 5
    Cool the mold.
  • Step 6
    Unlock the clamp.
  • Step 7
    Leave the weld form at the place.
  • Step 1
    Preheat graphite mold.
  • Step 2
    Preheat the surface of the metal or conductor.
  • Step 3
    Set the graphite mold and metal surface in correct place. Tightly clamp the mold together.
  • Step 4
    Put the disk in the mold.
  • Step 5
    The disk is in place.
  • Step 6
    Gently tap the welding powder into the mold.
  • Step 7
    Trace the starting powder on lid of the mold.
  • Step 8
    Cover the lid.
  • Step 9
    Cover the lid.
  • Step 10
    The reaction is on process.
  • Step 11
    Leave the mold to cool down.
  • Step 12
    Unlock the clamp.
  • Step 13
    There are a beautiful welding form.
  • Step 1
    After stable setting the ceramic mold and metal surface in place, put the disk into mold.
  • Step 2
    Tap the welding powder into mold.
  • Step 3
    Cover the lid and easily trace the staring powder on it.
  • Step 4
    Use the flint gun to ignite the starting powder.
  • Step 5
    The ignition takes place.
  • Step 6
    The exothermic reaction is on process immediately.
  • Step 7
    The process ends. Leave the mold to cool.
  • Step 8
    Break the mold.
  • Step 9
    The weld form is complete.